HS Code 8465.20 : Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, machining centers is 8465.20. Under the 2026 Singapore (Singapore Customs), the representative MFN general duty rate is 0% [Singapore Customs].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 84
Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Heading 8465
Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Subheading .20
.20
Machining centers
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
Singapore (Singapore Customs / Freeport 2026)
8465.20
MODULE 5: SINGAPORE FREEPORT & GST BREAKDOWN
SINGAPORE FREE PORT REGIME
0% customs duty — Singapore is a free port. Standard commercial imports enter customs-duty free, subject only to 9% GST calculated on CIF value.
Notice: Singapore customs clearance, 9% GST assessment, and specific excise duty (liquors, tobacco, petroleum, motor vehicles) are governed by Singapore Customs and IRAS. Verify declarable trade permits at customs.gov.sg prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8465.20
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 8465.20.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
7.5% – 25% Additional Duty (China Origin)
Section 232 Steel/Aluminum Status
Exempt (Non-Metal Commodity)
EU CBAM Carbon Alert
Not in Scope
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers
MODULE 11: Singapore Customs Advance Tariff Ruling
Legally binding advance classification rulings issued by Singapore Customs for HS 8465.20.
Query official Singapore Customs portal:
Search Official Singapore Customs Portal for 8465.20 →Singapore Declarable Tariff Lines (8465.20)
National line-level (8/10-digit) detail for Singapore (Singapore Customs): coverage in progress.
Universal 6-digit WCO backbone applied rate: 0%. Confirm the full national commodity code at the official source (Singapore Customs).
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 8465.10 | Subheading under Heading 8465 | Compare Subheading 8465.10 → |
| 8465.91 | Subheading under Heading 8465 | Compare Subheading 8465.91 → |
| 8465.92 | Subheading under Heading 8465 | Compare Subheading 8465.92 → |
| 8465.93 | Subheading under Heading 8465 | Compare Subheading 8465.93 → |
| 8465.94 | Subheading under Heading 8465 | Compare Subheading 8465.94 → |
| 8465.95 | Subheading under Heading 8465 | Compare Subheading 8465.95 → |
| 8465.96 | Subheading under Heading 8465 | Compare Subheading 8465.96 → |
| 8465.99 | Subheading under Heading 8465 | Compare Subheading 8465.99 → |
Official Primary Sources & Authority References
Singapore Customs Official Trade Portal ↗
Official Singapore free port schedule, GST 9% rules, and dutiable goods excise rates.
Singapore Customs Advance Classification Ruling System ↗
Singapore Customs binding advance tariff classification rulings database.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and Singapore (Singapore Customs) general duty for Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers?
Under WCO Harmonized System 2022 and Singapore (Singapore Customs), Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers is classified under HS 8465.20 (Heading 8465, Chapter 84). The representative SG MFN general duty rate is 0%.
How is HS 8465.20 distinguished within Heading 8465 (Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials)?
Heading 8465 covers Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials. Subheading 8465.20 specifically isolates Machining centers. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8465.
What are the primary candidate subheadings related to HS 8465.20?
Related subheadings under Heading 8465 include 8465.10, 8465.91, 8465.92, 8465.93, 8465.94, 8465.95, 8465.96, 8465.99. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 8465.20 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers?
Commercial shipments of Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, Machining centers with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 8465.20?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
Does Singapore levy customs duty on imports of HS 8465.20?
Singapore is a free port and levies 0% ad-valorem customs duty on virtually all goods. However, a 9% Goods and Services Tax (GST) applies to all imports, and specific excise duty applies to alcohol (Ch 22), tobacco (Ch 24), petroleum (Ch 27), and motor vehicles (Ch 87).
What is Singapore's de minimis GST exemption threshold?
Singapore has NO de minimis GST exemption since 2023. All imported goods, including low-value goods (LVG) purchased online, are subject to 9% GST.
Which agency regulates customs entry and GST in Singapore?
Customs permits, 9% GST assessment, and advance tariff classification rulings are administered by Singapore Customs under the Ministry of Finance.
💬
Ask Jack — Customs Lookup