HS Code 7209.17 : In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for in coils, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 72
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Heading 7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Subheading .17
.17
In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
8-DIGIT AU WORKING TARIFF CODE
7209.17.00
ABF Working Tariff Schedule
Customs Authority
Australian Border Force
ICS Electronic Clearance
De Minimis (LVT)
AUD $1,000
Low-Value Threshold
Advance Ruling System
ABF Tariff Advice System
Part XVI Customs Act 1901
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7209.17
Receive an automated email notification whenever the ABF publishes duty rate adjustments or customs notices for 7209.17.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Australian Trade Remedies (Anti-Dumping Commission) & Safeguards
Anti-Dumping Commission (ADC) Status
Standard Working Tariff
Australian Anti-Dumping Commission [ADC]
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm
MODULE 11: Australian Border Force Tariff Advice Rulings
Legally binding tariff classification decisions issued by the Australian Border Force (ABF), Part XVI Customs Act 1901 for HS 7209.17.
Query official ABF Tariff Advice classification rulings:
Search Official ABF Tariff Advice Database for 7209.17 →ABF Australian 8-Digit Working Tariff Lines (7209.17)
| Commodity Code | Description | Duty Rate | Unit |
|---|---|---|---|
| In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding |
Free | — |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 7209.15 | Subheading under Heading 7209 | Compare Subheading 7209.15 → |
| 7209.16 | Subheading under Heading 7209 | Compare Subheading 7209.16 → |
| 7209.18 | Subheading under Heading 7209 | Compare Subheading 7209.18 → |
| 7209.25 | Subheading under Heading 7209 | Compare Subheading 7209.25 → |
| 7209.26 | Subheading under Heading 7209 | Compare Subheading 7209.26 → |
| 7209.27 | Subheading under Heading 7209 | Compare Subheading 7209.27 → |
| 7209.28 | Subheading under Heading 7209 | Compare Subheading 7209.28 → |
| 7209.90 | Subheading under Heading 7209 | Compare Subheading 7209.90 → |
Official Primary Sources & Authority References
Australian Border Force Working Tariff 2026 ↗
Official Australian 8-digit Working Tariff items and General duty rates.
DAFF Biosecurity Import Conditions (BICON) ↗
Australian Department of Agriculture, Fisheries and Forestry biosecurity requirements.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and Australia (ABF) general duty for In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm ?
Under WCO Harmonized System 2022 and Australia (ABF), In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm is classified under HS 7209.17 (Heading 7209, Chapter 72). The representative AU MFN general duty rate is Free.
How is HS 7209.17 distinguished within Heading 7209 (Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated)?
Heading 7209 covers Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. Subheading 7209.17 specifically isolates In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm . Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7209.
What are the primary candidate subheadings related to HS 7209.17?
Related subheadings under Heading 7209 include 7209.15, 7209.16, 7209.18, 7209.25, 7209.26, 7209.27, 7209.28, 7209.90. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm into Australia?
Importers require an ABF Full Import Declaration (FID) via ICS portal, Australian Business Number (ABN), Commercial Invoice, Packing List, Bill of Lading, and DAFF biosecurity clearance where applicable.
Can goods under HS 7209.17 enter duty-free under FTAs into Australia?
Yes. Goods originating in US (AUSFTA), China (ChAFTA), Japan (JAEPA), Korea (KAFTA), UK (A-UKFTA), India (AI-ECTA), or CPTPP/RCEP enter Australia duty-free or at concessional rates.
What is the Australian customs duty de minimis threshold for In coils, not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm ?
Consignments with a Customs Value of AUD $1,000 or less enter Australia duty-free. Low-value B2C imports are subject to 10% GST under vendor registration rules.
How can an importer obtain an ABF Tariff Advice ruling for HS 7209.17 in Australia?
Importers or customs brokers may lodge an application for an ABF Tariff Advice under Part XVI of the Customs Act 1901 for a legally binding tariff classification decision.
How is Australian GST calculated on imports of HS 7209.17?
Australia levies 10.00% GST on the Value of the Taxable Importation = customs value + customs duty + international transport + insurance. There is no US-style MPF/HMF.
What is the ABN and import declaration requirement in Australia?
Commercial importers require an Australian Business Number (ABN) and lodge an ABF Full Import Declaration (FID) via the Integrated Cargo System (ICS).
What DAFF biosecurity (BICON) controls apply to HS 7209.17 in Australia?
Imports must satisfy Department of Agriculture, Fisheries and Forestry (DAFF) BICON biosecurity import conditions; food, plant, and animal products require inspection and clearance.
What Australian anti-dumping or countervailing measures apply to HS 7209.17?
Importers must verify whether measures administered by the Anti-Dumping Commission apply to their specific country of origin.
How do Australian FTA preferences (AUSFTA, ChAFTA, CPTPP) apply to HS 7209.17?
Qualifying originating goods from FTA partners enter duty-free or at concessional rates with a valid Certificate/Declaration of Origin meeting the relevant Rules of Origin.
Are there entry processing fees or harbor taxes in Australia?
Beyond customs duty and 10% GST, an Import Processing Charge applies to declarations above the AUD $1,000 low-value threshold; there is no US-style MPF/HMF.
💬
Ask Jack — Customs Lookup