HS Code 7306.30 : Other, welded, of circular cross section, of iron or nonalloy steel
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for other, welded, of circular cross section, of iron or nonalloy steel is 7306.30. Under the 2026 Côte d'Ivoire (Douanes), the representative MFN general duty rate is 15% [Direction Générale des Douanes].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 73
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
Heading 7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
Subheading .30
.30
Other, welded, of circular cross section, of iron or nonalloy steel
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
Côte d'Ivoire (Direction Générale des Douanes Tariff 2026)
7306.30
MODULE 5: CÔTE D'IVOIRE IMPORT DUTY & 18% VAT (TVA) BREAKDOWN
Import VAT / Tax Rate
18% VAT (TVA)
Local Tax Rate
Notice: Côte d'Ivoire customs entry, tariff classification, MFN duty rates, and 18% VAT (TVA) are governed by Direction Générale des Douanes. Always verify declarable lines with Direction Générale des Douanes prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7306.30
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 7306.30.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
0% Additional Duty (Exempt)
Section 232 Steel/Aluminum Status
25% Additional Duty (Proclamation 9704)
EU CBAM Carbon Alert
EU CBAM Covered Sector
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Other, welded, of circular cross section, of iron or nonalloy steel
MODULE 11: Douanes Ivoiriennes Advance Ruling System
Legally binding advance tariff rulings issued by Direction Générale des Douanes for HS 7306.30.
Query official Customs portal:
Search Official Customs Portal for 7306.30 →Côte d'Ivoire Declarable Tariff Schedule (7306.30)
National line-level (8/10-digit) detail for Côte d'Ivoire (Douanes): coverage in progress.
Universal 6-digit WCO backbone applied rate: 15%. Confirm the full national commodity code at the official source (Direction Générale des Douanes).
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 7306.11 | Subheading under Heading 7306 | Compare Subheading 7306.11 → |
| 7306.19 | Subheading under Heading 7306 | Compare Subheading 7306.19 → |
| 7306.21 | Subheading under Heading 7306 | Compare Subheading 7306.21 → |
| 7306.29 | Subheading under Heading 7306 | Compare Subheading 7306.29 → |
| 7306.40 | Subheading under Heading 7306 | Compare Subheading 7306.40 → |
| 7306.50 | Subheading under Heading 7306 | Compare Subheading 7306.50 → |
| 7306.61 | Subheading under Heading 7306 | Compare Subheading 7306.61 → |
| 7306.69 | Subheading under Heading 7306 | Compare Subheading 7306.69 → |
Official Primary Sources & Authority References
USITC HTS Chapter 73 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for Other, welded, of circular cross section, of iron or nonalloy steel.
CBP CROSS Ruling Database (7306.30) ↗
Binding customs classification precedents for Heading 7306.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Other, welded, of circular cross section, of iron or nonalloy steel?
Under WCO Harmonized System 2022 and United States (USITC HTS), Other, welded, of circular cross section, of iron or nonalloy steel is classified under HS 7306.30 (Heading 7306, Chapter 73). The representative CI MFN general duty rate is 15%.
How is HS 7306.30 distinguished within Heading 7306 (Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel)?
Heading 7306 covers Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel. Subheading 7306.30 specifically isolates Other, welded, of circular cross section, of iron or nonalloy steel. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7306.
What are the primary candidate subheadings related to HS 7306.30?
Related subheadings under Heading 7306 include 7306.11, 7306.19, 7306.21, 7306.29, 7306.40, 7306.50, 7306.61, 7306.69. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Other, welded, of circular cross section, of iron or nonalloy steel?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 7306.30 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Other, welded, of circular cross section, of iron or nonalloy steel?
Commercial shipments of Other, welded, of circular cross section, of iron or nonalloy steel with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 7306.30?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What import VAT or sales tax applies to HS 7306.30 in Côte d'Ivoire?
Commercial imports of Other, welded, of circular cross section, of iron or nonalloy steel under HS 7306.30 into Côte d'Ivoire are subject to 18% VAT (TVA), assessed on the entered customs value plus applicable duties.
What is the customs duty de minimis threshold in Côte d'Ivoire?
The customs de minimis threshold for import shipments into Côte d'Ivoire is XOF threshold. Consignments under this value may qualify for duty-free or simplified entry under local regulations.
Which authority regulates customs entry and tariff classification in Côte d'Ivoire?
Customs declarations, import duty assessments, and Douanes Ivoiriennes Advance Ruling System for HS 7306.30 are administered by Direction Générale des Douanes.
💬
Ask Jack — Customs Lookup