HS Code 7216.61 : Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for angles, shapes and sections, not further worked than cold-formed or cold-finished, obtained from flat-rolled products is 7216.61. Under the 2026 Georgia (Revenue Service), the representative MFN general duty rate is 0% [Georgia Revenue Service].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Subheading .61
.61
Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
Georgia (Georgia Revenue Service Tariff 2026)
7216.61
MODULE 5: GEORGIA IMPORT DUTY & 18% VAT BREAKDOWN
Import VAT / Tax Rate
18% VAT
Local Tax Rate
Notice: Georgia customs entry, tariff classification, MFN duty rates, and 18% VAT are governed by Georgia Revenue Service. Always verify declarable lines with Georgia Revenue Service prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7216.61
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 7216.61.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
0% Additional Duty (Exempt)
Section 232 Steel/Aluminum Status
25% Additional Duty (Proclamation 9704)
EU CBAM Carbon Alert
EU CBAM Covered Sector
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products
MODULE 11: Georgia Revenue Service Advance Ruling System
Legally binding advance tariff rulings issued by Georgia Revenue Service for HS 7216.61.
Query official Customs portal:
Search Official Customs Portal for 7216.61 →Georgia Declarable Tariff Schedule (7216.61)
National line-level (8/10-digit) detail for Georgia (Revenue Service): coverage in progress.
Universal 6-digit WCO backbone applied rate: 0%. Confirm the full national commodity code at the official source (Georgia Revenue Service).
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 7216.10 | Subheading under Heading 7216 | Compare Subheading 7216.10 → |
| 7216.21 | Subheading under Heading 7216 | Compare Subheading 7216.21 → |
| 7216.22 | Subheading under Heading 7216 | Compare Subheading 7216.22 → |
| 7216.31 | Subheading under Heading 7216 | Compare Subheading 7216.31 → |
| 7216.32 | Subheading under Heading 7216 | Compare Subheading 7216.32 → |
| 7216.33 | Subheading under Heading 7216 | Compare Subheading 7216.33 → |
| 7216.40 | Subheading under Heading 7216 | Compare Subheading 7216.40 → |
| 7216.50 | Subheading under Heading 7216 | Compare Subheading 7216.50 → |
Official Primary Sources & Authority References
USITC HTS Chapter 72 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products.
CBP CROSS Ruling Database (7216.61) ↗
Binding customs classification precedents for Heading 7216.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products?
Under WCO Harmonized System 2022 and United States (USITC HTS), Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products is classified under HS 7216.61 (Heading 7216, Chapter 72). The representative GE MFN general duty rate is 0%.
How is HS 7216.61 distinguished within Heading 7216 (Angles, shapes and sections of iron or nonalloy steel)?
Heading 7216 covers Angles, shapes and sections of iron or nonalloy steel. Subheading 7216.61 specifically isolates Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7216.
What are the primary candidate subheadings related to HS 7216.61?
Related subheadings under Heading 7216 include 7216.10, 7216.21, 7216.22, 7216.31, 7216.32, 7216.33, 7216.40, 7216.50. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 7216.61 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products?
Commercial shipments of Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 7216.61?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What import VAT or sales tax applies to HS 7216.61 in Georgia?
Commercial imports of Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products under HS 7216.61 into Georgia are subject to 18% VAT, assessed on the entered customs value plus applicable duties.
What is the customs duty de minimis threshold in Georgia?
The customs de minimis threshold for import shipments into Georgia is GEL 300. Consignments under this value may qualify for duty-free or simplified entry under local regulations.
Which authority regulates customs entry and tariff classification in Georgia?
Customs declarations, import duty assessments, and Georgia Revenue Service Advance Ruling System for HS 7216.61 are administered by Georgia Revenue Service.
💬
Ask Jack — Customs Lookup