HS Code 8461.50 : Sawing or cutting-off machines
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for sawing or cutting-off machines is 8461.50. Under the 2026 India (CBIC), the representative MFN general duty rate is 7.50% [CBIC / Customs Tariff 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 84
Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included
Heading 8461
Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included
Subheading .50
.50
Sawing or cutting-off machines
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
8-DIGIT INDIA ITC-HS CODE
8461.50.00
CBIC ITC-HS Tariff Schedule
Integrated GST (IGST)
18.00%
(AV + BCD + SWS) Base
Landed Duty Rate
27.73%
Worked Compound Stack
Advance Ruling System
CAAR Rulings
CBIC Customs Authority
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8461.50
Receive an automated email notification whenever CBIC or the DGTR publishes duty rate adjustments or customs notices for 8461.50.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Indian Trade Remedies (DGTR AD/CVD) & Safeguards
DGTR Anti-Dumping / CVD Measures
Subject to Item Notice
Directorate General of Trade Remedies [DGTR]
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Sawing or cutting-off machines
MODULE 11: Customs Authority for Advance Rulings (CAAR / CBIC)
Legally binding tariff classification decisions issued by CAAR / CBIC under Section 28H of the Customs Act, 1962 for HS 8461.50.
Query the official CAAR Advance Ruling portal criteria:
Search Official CBIC Portal for 8461.50 →India ITC-HS 8-Digit Commodity Lines (8461.50)
| Commodity Code | Description | Duty Rate | Unit |
|---|---|---|---|
| Sawing or cutting-off machines | 7.50% | — |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 8461.20 | Subheading under Heading 8461 | Compare Subheading 8461.20 → |
| 8461.30 | Subheading under Heading 8461 | Compare Subheading 8461.30 → |
| 8461.40 | Subheading under Heading 8461 | Compare Subheading 8461.40 → |
| 8461.90 | Subheading under Heading 8461 | Compare Subheading 8461.90 → |
Official Primary Sources & Authority References
CBIC Customs Tariff Schedule (ITC-HS 2026) ↗
Official Indian 8-digit ITC-HS tariff items, Basic Customs Duty (BCD), SWS, and IGST.
Central Board of Indirect Taxes and Customs (CBIC) ↗
Indian Ministry of Finance customs administration and Customs Tariff Act 1975.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and India (CBIC) general duty for Sawing or cutting-off machines?
Under WCO Harmonized System 2022 and India (CBIC), Sawing or cutting-off machines is classified under HS 8461.50 (Heading 8461, Chapter 84). The representative IN MFN general duty rate is 7.50%.
How is HS 8461.50 distinguished within Heading 8461 (Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included)?
Heading 8461 covers Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included. Subheading 8461.50 specifically isolates Sawing or cutting-off machines. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8461.
What are the primary candidate subheadings related to HS 8461.50?
Related subheadings under Heading 8461 include 8461.20, 8461.30, 8461.40, 8461.90. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Sawing or cutting-off machines into India?
Importers require a Bill of Entry (BE) lodged on the ICEGATE portal by a Customs Broker (CHA), active Import Export Code (IEC) from DGFT, GSTIN registration, Commercial Invoice, Packing List, and Bill of Lading.
Can goods under HS 8461.50 enter duty-free under FTAs into India?
Yes. Goods originating in ASEAN countries (AIFTA), Japan (IJCEPA), South Korea (IKCEPA), UAE (India-UAE CEPA), or Australia (ECTA) enter India under preferential BCD rates subject to CAROTAR 2020.
What is the Indian customs duty de minimis threshold for Sawing or cutting-off machines?
Under Courier Imports and Exports (Clearance) Regulations, imported goods valued up to ₹10,000 INR enter India duty-free, while commercial shipments above ₹10,000 require formal ICEGATE entry.
How can an importer obtain a CAAR Advance Ruling for HS 8461.50 in India?
Importers or foreign exporters may apply to the Customs Authority for Advance Rulings (CAAR) under Section 28H of the Customs Act, 1962 for a legally binding classification ruling.
How is the compound landed duty (BCD + SWS + IGST) calculated for HS 8461.50 in India?
India applies a compound stack: Basic Customs Duty (BCD) on assessable value, Social Welfare Surcharge (SWS) at 10% of BCD, and Integrated GST (IGST) on (assessable value + BCD + SWS). Some goods add AIDC or compensation cess.
What IGST rate applies to imports of HS 8461.50 into India?
Integrated GST (IGST) is levied at 5%, 12%, 18%, or 28% depending on the goods, assessed on the assessable value plus BCD plus SWS. There is no US-style MPF/HMF.
What is the Import Export Code (IEC) and GSTIN requirement for India?
Commercial importers require a 10-digit Import Export Code (IEC) issued by DGFT and a GSTIN registration; entry is lodged as a Bill of Entry on ICEGATE via a Customs Broker (CHA).
How do CAROTAR 2020 rules of origin apply to preferential imports under HS 8461.50?
Importers claiming FTA preferential BCD rates must satisfy CAROTAR 2020 origin verification, holding a valid Certificate of Origin and supporting production records.
What DGTR trade remedy (anti-dumping / safeguard) measures apply to HS 8461.50?
Importers must verify whether anti-dumping, countervailing, or safeguard duties recommended by the Directorate General of Trade Remedies (DGTR) apply to their origin.
Are BIS or FSSAI standards clearances required for HS 8461.50 in India?
Regulated goods may require BIS (ISI) certification, FSSAI clearance for food, or other line-ministry NOCs prior to customs release.
💬
Ask Jack — Customs Lookup