HS Code 8460.19 : Flat-surface grinding machines, Other
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for flat-surface grinding machines, other is 8460.19. Under the 2026 Norway (Tolletaten), the representative MFN general duty rate is 0% [Norwegian Customs (Tolletaten)].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 84
Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461
Heading 8460
Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461
Subheading .19
.19
Flat-surface grinding machines, Other
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
Norway (Tolletaten / Norwegian Customs)
8460.19
MODULE 5: NORWAY IMPORT DUTY & MVA BREAKDOWN
Notice: Norwegian customs clearance, toll tariff classification, MFN duties, and 25% MVA (VAT) are governed by Tolletaten. Always verify declarable lines with Tolletaten prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8460.19
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 8460.19.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
7.5% – 25% Additional Duty (China Origin)
Section 232 Steel/Aluminum Status
Exempt (Non-Metal Commodity)
EU CBAM Carbon Alert
Not in Scope
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Flat-surface grinding machines, Other
MODULE 11: Norwegian Tolletaten Binding Tariff Information
Legally binding tariff information issued by Tolletaten for HS 8460.19.
Query official Tolletaten portal:
Search Tolletaten Portal for 8460.19 →Norwegian Customs Tolletaten Lines (8460.19)
National line-level (8/10-digit) detail for Norway (Tolletaten): coverage in progress.
Universal 6-digit WCO backbone applied rate: 0%. Confirm the full national commodity code at the official source (Norwegian Customs (Tolletaten)).
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 8460.12 | Subheading under Heading 8460 | Compare Subheading 8460.12 → |
| 8460.22 | Subheading under Heading 8460 | Compare Subheading 8460.22 → |
| 8460.23 | Subheading under Heading 8460 | Compare Subheading 8460.23 → |
| 8460.24 | Subheading under Heading 8460 | Compare Subheading 8460.24 → |
| 8460.29 | Subheading under Heading 8460 | Compare Subheading 8460.29 → |
| 8460.31 | Subheading under Heading 8460 | Compare Subheading 8460.31 → |
| 8460.39 | Subheading under Heading 8460 | Compare Subheading 8460.39 → |
| 8460.40 | Subheading under Heading 8460 | Compare Subheading 8460.40 → |
Official Primary Sources & Authority References
Norwegian Customs (Tolletaten) ↗
Official Norway Tolletaten tariff schedule, 25% MVA, and EFTA/EEA rules.
Tolletaten Binding Tariff Information Portal ↗
Tolletaten binding tariff classification information database.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Flat-surface grinding machines, Other?
Under WCO Harmonized System 2022 and United States (USITC HTS), Flat-surface grinding machines, Other is classified under HS 8460.19 (Heading 8460, Chapter 84). The representative NO MFN general duty rate is 0%.
How is HS 8460.19 distinguished within Heading 8460 (Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461)?
Heading 8460 covers Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461. Subheading 8460.19 specifically isolates Flat-surface grinding machines, Other. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8460.
What are the primary candidate subheadings related to HS 8460.19?
Related subheadings under Heading 8460 include 8460.12, 8460.22, 8460.23, 8460.24, 8460.29, 8460.31, 8460.39, 8460.40. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Flat-surface grinding machines, Other?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 8460.19 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Flat-surface grinding machines, Other?
Commercial shipments of Flat-surface grinding machines, Other with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 8460.19?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What import VAT or sales tax applies to HS 8460.19 in Norway?
Commercial imports of Flat-surface grinding machines, Other under HS 8460.19 into Norway are subject to 25% MVA (Import VAT), assessed on the entered customs value plus applicable duties.
What is the customs duty de minimis threshold in Norway?
The customs de minimis threshold for import shipments into Norway is NOK 350. Consignments under this value may qualify for duty-free or simplified entry under local regulations.
Which authority regulates customs entry and tariff classification in Norway?
Customs declarations, import duty assessments, and Tolletaten Binding Tariff Information Portal for HS 8460.19 are administered by Norwegian Customs (Tolletaten).
💬
Ask Jack — Customs Lookup