HS Code 8466.10 : Tool holders and self-opening dieheads
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for tool holders and self-opening dieheads is 8466.10. Under the 2026 Ukraine (State Customs), the representative MFN general duty rate is 2% [State Customs Service of Ukraine].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 84
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
Heading 8466
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
Subheading .10
.10
Tool holders and self-opening dieheads
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
Ukraine (State Customs Service)
8466.10
MODULE 5: UKRAINE IMPORT DUTY & VAT (ПДВ) BREAKDOWN
Notice: Ukrainian customs clearance, UKTVED tariff classification, MFN duty rates, and 20% ПДВ (VAT) are governed by State Customs Service of Ukraine. Always verify declarable lines with State Customs prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8466.10
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 8466.10.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
7.5% – 25% Additional Duty (China Origin)
Section 232 Steel/Aluminum Status
Exempt (Non-Metal Commodity)
EU CBAM Carbon Alert
Not in Scope
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Tool holders and self-opening dieheads
MODULE 11: State Customs Advance Ruling System
Legally binding advance tariff rulings issued by State Customs Service of Ukraine for HS 8466.10.
Query official Ukraine Customs portal:
Search Ukraine Customs Portal for 8466.10 →Ukraine State Customs Tariff Schedule (8466.10)
National line-level (8/10-digit) detail for Ukraine (State Customs): coverage in progress.
Universal 6-digit WCO backbone applied rate: 2%. Confirm the full national commodity code at the official source (State Customs Service of Ukraine).
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 8466.20 | Subheading under Heading 8466 | Compare Subheading 8466.20 → |
| 8466.30 | Subheading under Heading 8466 | Compare Subheading 8466.30 → |
| 8466.91 | Subheading under Heading 8466 | Compare Subheading 8466.91 → |
| 8466.92 | Subheading under Heading 8466 | Compare Subheading 8466.92 → |
| 8466.93 | Subheading under Heading 8466 | Compare Subheading 8466.93 → |
| 8466.94 | Subheading under Heading 8466 | Compare Subheading 8466.94 → |
Official Primary Sources & Authority References
State Customs Service of Ukraine ↗
Official Ukraine State Customs tariff schedule, 20% VAT (ПДВ), and EU DCFTA rules.
State Customs Advance Ruling System ↗
State Customs Service of Ukraine official binding advance classification rulings database.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Tool holders and self-opening dieheads?
Under WCO Harmonized System 2022 and United States (USITC HTS), Tool holders and self-opening dieheads is classified under HS 8466.10 (Heading 8466, Chapter 84). The representative UA MFN general duty rate is 2%.
How is HS 8466.10 distinguished within Heading 8466 (Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand)?
Heading 8466 covers Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand. Subheading 8466.10 specifically isolates Tool holders and self-opening dieheads. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8466.
What are the primary candidate subheadings related to HS 8466.10?
Related subheadings under Heading 8466 include 8466.20, 8466.30, 8466.91, 8466.92, 8466.93, 8466.94. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Tool holders and self-opening dieheads?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 8466.10 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Tool holders and self-opening dieheads?
Commercial shipments of Tool holders and self-opening dieheads with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 8466.10?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What import VAT or sales tax applies to HS 8466.10 in Ukraine?
Commercial imports of Tool holders and self-opening dieheads under HS 8466.10 into Ukraine are subject to 20% VAT (ПДВ), assessed on the entered customs value plus applicable duties.
What is the customs duty de minimis threshold in Ukraine?
The customs de minimis threshold for import shipments into Ukraine is €150. Consignments under this value may qualify for duty-free or simplified entry under local regulations.
Which authority regulates customs entry and tariff classification in Ukraine?
Customs declarations, import duty assessments, and State Customs Advance Ruling System for HS 8466.10 are administered by State Customs Service of Ukraine.
💬
Ask Jack — Customs Lookup