HS Code 7213.91 : Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, other, of circular cross section measuring less than 14 mm in diameter is 7213.91. Under the 2026 United Kingdom (UKGT), the representative MFN general duty rate is 0.00 % [HMRC Trade Tariff 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Subheading .91
.91
Other, Of circular cross section measuring less than 14 mm in diameter
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United Kingdom (UK Global Tariff / UKGT 2026)
7213919000
MODULE 5: UK IMPORT DUTY & VAT BREAKDOWN
UK Customs De Minimis
£135.00
Duty-free threshold
Notice: UK import duties and VAT are governed by HM Revenue & Customs (HMRC). Always verify declarable 10-digit commodity codes and preference eligibility before customs lodgement.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7213.91
Receive an automated email notification whenever HMRC publishes duty rate adjustments or customs notices for 7213.91.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: UK Trade Remedies (TRA) & Safeguards
UK TRA Anti-Dumping Status
Standard UKGT Tariff
UK Steel Safeguards
UK TRA Tariff-Rate Quota (TRQ) Active
DEFRA / MHRA Control Status
Standard Statutory Clearance
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| TCA | UK-EU Trade and Cooperation Agreement | Free | Must satisfy UK-EU Statement on Origin and product-specific rules. |
| AUS | UK-Australia Free Trade Agreement | Free | Direct origin proof or tariff shift requirement. |
| CPTPP | Comprehensive and Progressive Agreement for Trans-Pacific Partnership | Free | CPTPP Certificate of Origin and regional value content rule. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter
MODULE 11: UK Advanced Tariff Rulings (ATaR)
Legally binding classification rulings issued by HM Revenue & Customs (HMRC) for HS 7213.91.
Query the official HMRC Advanced Tariff Rulings (ATaR) database:
Search HMRC Trade Tariff Database for 7213.91 →UKGT Declarable Commodity Lines (7213.91)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 7213.91 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter | Free | Free | Rate on request | — |
| 7213.91.30 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter, Not tempered, not treated and not partly manufactured | Free | Free | 5.5% | — |
| 7213.91.30.11 | Other, Of circular cross section measuring less than 14 mm in diameter, Not tempered, not treated and not partly manufactured, Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter | Free | Free | Rate on request | kg |
| 7213.91.30.15 | Other, Of circular cross section measuring less than 14 mm in diameter, Not tempered, not treated and not partly manufactured, Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter | Free | Free | Rate on request | kg |
| 7213.91.30.20 | Other, Of circular cross section measuring less than 14 mm in diameter, Not tempered, not treated and not partly manufactured, Of welding quality wire rods of a kind described in statistical note 7 to this chapter | Free | Free | Rate on request | kg |
| 7213.91.30.93 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter, Not tempered, not treated and not partly manufactured, Other | Free | Free | Rate on request | kg |
| 7213.91.45.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter, Other, Containing by weight 0.6 percent or more of carbon | Free | Free | 5.5% | kg |
| 7213.91.60.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter, Other, Other | Free | Free | 6% | kg |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 7213.10 | Subheading under Heading 7213 | Compare Subheading 7213.10 → |
| 7213.20 | Subheading under Heading 7213 | Compare Subheading 7213.20 → |
| 7213.99 | Subheading under Heading 7213 | Compare Subheading 7213.99 → |
Official Primary Sources & Authority References
HMRC Trade Tariff Service (UKGT 2026) ↗
Official UK 10-digit commodity codes and UKGT MFN duty rates.
HM Revenue & Customs (HMRC) Customs Declarations ↗
UK customs entry guidance and CDS procedures.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United Kingdom (UKGT) general duty for Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter?
Under WCO Harmonized System 2022 and United Kingdom (UKGT), Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter is classified under HS 7213.91 (Heading 7213, Chapter 72). The representative UK MFN general duty rate is 0.00 %.
How is HS 7213.91 distinguished within Heading 7213 (Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel)?
Heading 7213 covers Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel. Subheading 7213.91 specifically isolates Other, Of circular cross section measuring less than 14 mm in diameter. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7213.
What are the primary candidate subheadings related to HS 7213.91?
Related subheadings under Heading 7213 include 7213.10, 7213.20, 7213.99. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter into the United Kingdom?
Importers require a Commercial Invoice (detailing Incoterms and origin), Packing List, Bill of Lading (or Air Waybill), HMRC Customs Declaration Service (CDS) entry declaration (or Single Administrative Document / SAD), active EORI number, and proof of origin.
Can goods under HS 7213.91 enter duty-free under UK Free Trade Agreements?
Yes. Eligible goods originating in EU Member States, US, Japan, Australia, or CPTPP countries enter duty-free or under reduced tariff rates provided they satisfy Rules of Origin with an official Statement on Origin.
What is the UK customs duty de minimis threshold for shipments of Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel, Other, Of circular cross section measuring less than 14 mm in diameter?
Shipments imported into Great Britain with an intrinsic value of £135 or less enter customs duty-free under UKGT rules, though 20.00% import VAT remains payable.
How can an importer obtain an official UK Advanced Tariff Ruling (ATaR) for HS 7213.91?
Importers may apply to HM Revenue & Customs (HMRC) for an Advanced Tariff Ruling (ATaR). An ATaR provides legally binding tariff classification for 3 years across the United Kingdom.
What import VAT rate applies to HS 7213.91 in the United Kingdom?
Standard UK import VAT is 20.00%, calculated on total landed CIF cost (Customs Value + Freight/Insurance + UKGT Import Duty). Reduced or zero rates apply to specific statutory essential goods.
What is the UK EORI registration requirement for commercial imports under HS 7213.91?
All businesses importing goods into Great Britain require a UK EORI number starting with 'GB' (registered via HMRC Government Gateway) for CDS customs entry declarations.
How does UK Postponed VAT Accounting (PVA) work for imports of HS 7213.91?
Under UK PVA rules, UK VAT-registered importers can account for and recover import VAT on their standard VAT return rather than paying upfront at the port of entry.
What UK Trade Remedies Authority (TRA) safeguarding or anti-dumping duties apply?
Importers must verify whether specific trade remedies (anti-dumping or countervailing measures) published by the UK Trade Remedies Authority (TRA) apply to their originating country.
What prohibited or restricted goods controls apply to HS 7213.91 in the UK?
Certain commodities under HS 7213.91 require import licenses or phytosanitary inspections from DEFRA, MHRA, or the UK Environment Agency prior to UK customs release.
Are there entry processing fees or harbor taxes in the UK?
No. The United Kingdom does not charge additional entry processing fees or harbor taxes beyond standard UKGT customs duties and applicable import VAT. Customs declarations are processed via HMRC CDS.