HS Code 4409.10 : Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
Tariff data verified: July 2026
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, coniferous is 4409.10. Under the 2026 United States (USITC HTS), the representative MFN general duty rate is Free [USITC HTS Tariff Schedule 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 44
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
Heading 4409
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
Subheading .10
.10
Coniferous
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyNetherlandsBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
United States (USITC HTS 2026)
4409.10
Representative General Duty
Free
(rates range Free–4.9% across national sub-lines)
Verified July 2026 · USITC Source
MODULE 5: US IMPORT DUTY & FEE BREAKDOWN (LANDED COST STACK)
Federal Import VAT / GST
0.00%
US Has NO Federal VAT
Notice: Duty rates and trade remedies change frequently (Section 301, Section 232, anti-dumping orders, de minimis thresholds). Duty calculations are estimates for informational purposes only. Always verify exact rates with U.S. Customs and Border Protection (CBP) or a licensed customs broker prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 4409.10
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 4409.10.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
0% Additional Duty (Exempt)
Section 232 Steel/Aluminum Status
Exempt (Non-Metal Commodity)
EU CBAM Carbon Alert
Not in Scope
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous
MODULE 11: Official CBP CROSS Binding Classification Rulings
No official CBP CROSS classification precedents indexed for subheading 440910 yet.
US National HTS Tariff Lines (4409.10)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 4409.10 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous | Free | Free | Rate on request | — |
| 4409.10.05.00 | Coniferous, Wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed | 3.2% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 33 1/3% | m3 |
| 4409.10.10 | Coniferous, Other, Wood siding | Free | Free | 2.2¢/m2 | — |
| 4409.10.10.20 | Coniferous, Other, Wood siding, Resawn bevel siding, Western red cedar | Free | Free | Rate on request | m2 |
| 4409.10.10.40 | Coniferous, Other, Wood siding, Resawn bevel siding, Other | Free | Free | Rate on request | m2 |
| 4409.10.10.60 | Coniferous, Other, Wood siding, Other, Western red cedar | Free | Free | Rate on request | m2 |
| 4409.10.10.80 | Coniferous, Other, Wood siding, Other, Other | Free | Free | Rate on request | m2 |
| 4409.10.20.00 | Coniferous, Other, Wood flooring | Free | Free | 33 1/3% | m2 |
| 4409.10.40 | Coniferous, Other, Wood moldings, Standard wood molding, Pine (Pinus spp.) | Free | Free | 5% | — |
| 4409.10.40.10 | Coniferous, Other, Wood moldings, Standard wood molding, Pine (Pinus spp.), End-jointed | Free | Free | Rate on request | m |
| 4409.10.40.90 | Coniferous, Other, Wood moldings, Standard wood molding, Pine (Pinus spp.), Other | Free | Free | Rate on request | m |
| 4409.10.45.00 | Coniferous, Other, Wood moldings, Standard wood molding, Other | Free | Free | 5% | m |
| 4409.10.50.00 | Coniferous, Other, Wood moldings, Other | Free | Free | 40% | m |
| 4409.10.60.00 | Coniferous, Other, Wood dowel rods, Plain | Free | Free | 5% | m |
| 4409.10.65.00 | Coniferous, Other, Wood dowel rods, Sanded, grooved, or otherwise advanced in condition | 4.9% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 33 1/3% | m |
| 4409.10.90 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous, Other, Other | Free | Free | $1.70/m3 | — |
| 4409.10.90.20 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous, Other, Other, Western red cedar | Free | Free | Rate on request | m2 |
| 4409.10.90.40 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous, Other, Other, Other | Free | Free | Rate on request | m2 |
⚠️ U.S. AD/CVD Trade-Remedy Alert
2 Active Orders
HS 4409.10 appears in the scope of 2 active U.S. Antidumping/Countervailing Duty order(s) — covering Wood Mouldings and Millwork Products from China (Commerce case(s) A-570-117, C-570-118). Scope is defined by written product description, and duty rates are exporter-specific.
A-570-117 (China - Wood Mouldings and Millwork Products)C-570-118 (China - Wood Mouldings and Millwork Products)
Explore all 724 covered orders in the U.S. AD/CVD Trade Remedies Directory ↗. Verify exact scope at access.trade.gov and view the Active AD/CVD Directory. Not legal advice. Per-code scope flags cover the 437 highest-volume HS6 subheadings (724 of 778 active orders; 93% coverage); coverage expanding.
💡 U.S. Free Trade Agreement (FTA) Duty-Saver
HTS General Note 3(c) EligibleMerchandise under HS 4409.10 may qualify for reduced or duty-free preferential rates under U.S. Free Trade Agreements (USMCA, KORUS, Australia FTA, Israel FTA, Chile FTA, etc.) when meeting statutory Rules of Origin:
| 10-Digit HTS | MFN Rate (General) | Preferential / FTA Rate (Special Program) |
|---|---|---|
| 4409.10.05.00 | 3.2% | A: Generalized System of Preferences (GSP) AU: United States-Australia Free Trade Agreement BH: United States-Bahrain Free Trade Agreement CL: United States-Chile Free Trade Agreement CO: United States-Colombia Trade Promotion Agreement E: Caribbean Basin Economic Recovery Act (CBERA) IL: United States-Israel Free Trade Agreement JO: United States-Jordan Free Trade Agreement KR: U.S.-Korea Free Trade Agreement (KORUS) MA: United States-Morocco Free Trade Agreement OM: United States-Oman Free Trade Agreement P: United States-Mexico-Canada Agreement (USMCA / CUSMA / T-MEC) PA: United States-Panama Trade Promotion Agreement PE: United States-Peru Trade Promotion Agreement S: United States-Mexico-Canada Agreement (USMCA) SG: United States-Singapore Free Trade Agreement |
| 4409.10.65.00 | 4.9% | A: Generalized System of Preferences (GSP) AU: United States-Australia Free Trade Agreement BH: United States-Bahrain Free Trade Agreement CL: United States-Chile Free Trade Agreement CO: United States-Colombia Trade Promotion Agreement E: Caribbean Basin Economic Recovery Act (CBERA) IL: United States-Israel Free Trade Agreement JO: United States-Jordan Free Trade Agreement KR: U.S.-Korea Free Trade Agreement (KORUS) MA: United States-Morocco Free Trade Agreement OM: United States-Oman Free Trade Agreement P: United States-Mexico-Canada Agreement (USMCA / CUSMA / T-MEC) PA: United States-Panama Trade Promotion Agreement PE: United States-Peru Trade Promotion Agreement S: United States-Mexico-Canada Agreement (USMCA) SG: United States-Singapore Free Trade Agreement |
⚠️ GSP Statutory Caveat: Tariff preference codes A, A+, A* refer to the U.S. Generalized System of Preferences. GSP duty-free entry applies when GSP statutory authorization is currently in effect by U.S. Congress.
📜 Certificate of Origin Requirement: Preferential tariff treatment requires a valid Certificate of Origin demonstrating compliance with product-specific Rules of Origin (tariff shift or Regional Value Content). Eligibility is not automatic — verify origin rules at HTS General Note 3(c) Authority.
Informational lookup only — not legal, customs, or compliance advice. Verify official FTA eligibility with U.S. Customs and Border Protection (CBP) and a licensed customs broker before claiming preference on entry.
US 10-Digit Statistical HTS Breakout (4409.10)
15 Declarable Lines · USITC 2026
⚠️ Section 301 (China) Additional Tariff Alert
Heading 9903.88.03, 9903.90.08
If imported from China, merchandise under this HTS line carries an additional Section 301 tariff (see HTS heading 9903.88.03, 9903.90.08). Applicable Section 301 rates depend on country of origin — verify exact rate and exemptions at hts.usitc.gov.
| 10-Digit HTS Code | Statistical Description | General MFN Rate | FTA / Special Rate | Unit |
|---|---|---|---|---|
| 4409.10.05.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed | 3.2% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | m3 |
| 4409.10.10 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood siding | Free | Base MFN | — |
| 4409.10.10.20 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood siding Resawn bevel siding: Western red cedar | Free | Base MFN | m2 / m3 |
| 4409.10.10.40 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood siding Resawn bevel siding: Other | Free | Base MFN | m2 / m3 |
| 4409.10.10.60 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood siding Other: Western red cedar | Free | Base MFN | m2 / m3 |
| 4409.10.10.80 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood siding Other: Other | Free | Base MFN | m2 / m3 |
| 4409.10.20.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood flooring | Free | Base MFN | m2 / m3 |
| 4409.10.40.10 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood moldings: Standard wood molding: Pine (Pinus spp.) End-jointed | Free | Base MFN | m |
| 4409.10.40.90 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood moldings: Standard wood molding: Pine (Pinus spp.) Other | Free | Base MFN | m |
| 4409.10.45.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood moldings: Standard wood molding: Other | Free | Base MFN | m |
| 4409.10.50.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood moldings: Other | Free | Base MFN | m |
| 4409.10.60.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood dowel rods: Plain | Free | Base MFN | m / m3 |
| 4409.10.65.00 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Wood dowel rods: Sanded, grooved, or otherwise advanced in condition | 4.9% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | m / m3 |
| 4409.10.90.20 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Other Western red cedar | Free | Base MFN | m2 / m3 |
| 4409.10.90.40 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other: Other Other | Free | Base MFN | m2 / m3 |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 4409.21 | Subheading under Heading 4409 | HS 4409.21 undefined Duty & Entry Rules → |
| 4409.22 | Subheading under Heading 4409 | HS 4409.22 undefined Duty & Entry Rules → |
| 4409.29 | Subheading under Heading 4409 | HS 4409.29 undefined Duty & Entry Rules → |
MODULE 13: Industry Classification & Crosswalk Mesh (NAICS & Schedule B)
U.S. Census NAICS Code
U.S. Census Schedule B (Exports)
Official Primary Sources & Authority References
USITC HTS Chapter 44 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous.
CBP CROSS Ruling Database (4409.10) ↗
Binding customs classification precedents for Heading 4409.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
Is HS Code 4409.10 subject to U.S. Antidumping or Countervailing (AD/CVD) duties?
Yes. HS Code 4409.10 (Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous) falls within the product scope of 2 active U.S. Department of Commerce AD/CVD order(s), including Wood Mouldings and Millwork Products from China (Commerce case(s) A-570-117, C-570-118). Importers must verify exact product scope and their foreign manufacturer's exporter-specific duty deposit rate on Commerce's ACCESS portal (access.trade.gov) prior to U.S. Customs entry.
Is HS Code 4409.10 subject to U.S. Antidumping or Countervailing (AD/CVD) duties?
Yes. HS Code 4409.10 (Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous) falls within the product scope of 2 active U.S. Department of Commerce AD/CVD order(s), including Wood Mouldings and Millwork Products from China (Commerce case(s) A-570-117, C-570-118). Importers must verify exact product scope and their foreign manufacturer's exporter-specific duty deposit rate on Commerce's ACCESS portal (access.trade.gov) prior to U.S. Customs entry.
Is HS Code 4409.10 subject to U.S. Antidumping or Countervailing (AD/CVD) duties?
Yes. HS Code 4409.10 (Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous) falls within the product scope of 2 active U.S. Department of Commerce AD/CVD order(s), including Wood Mouldings and Millwork Products from China (Commerce case(s) A-570-117, C-570-118). Importers must verify exact product scope and their foreign manufacturer's exporter-specific duty deposit rate on Commerce's ACCESS portal (access.trade.gov) prior to U.S. Customs entry.
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous?
Under WCO Harmonized System 2022 and United States (USITC HTS), Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous is classified under HS 4409.10 (Heading 4409, Chapter 44). The representative US MFN general duty rate is Free.
How is HS 4409.10 distinguished within Heading 4409 (Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed)?
Heading 4409 covers Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Subheading 4409.10 specifically isolates Coniferous. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 4409.
What are the primary candidate subheadings related to HS 4409.10?
Related subheadings under Heading 4409 include 4409.21, 4409.22, 4409.29. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 4409.10 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous?
Commercial shipments of Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, Coniferous with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 4409.10?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What U.S. Census NAICS industry code corresponds to HS 4409.10?
HS 4409.10 maps to NAICS code 321918 (Other Wood Product Manufacturing) under official U.S. Census Bureau trade concordance tables.
Does the United States assess federal VAT or GST on imports of HS 4409.10?
No. The United States does NOT charge a federal Value-Added Tax (VAT) or Goods and Services Tax (GST) on imports. Importers pay customs duty + MPF + HMF (if ocean freight).
How are Merchandise Processing Fee (MPF) and Harbor Maintenance Fee (HMF) calculated?
MPF is assessed at 0.3464% of entered value (min $32.71, max $634.62 per entry). HMF is assessed at 0.125% on ocean freight shipments entering US ports.
What is the Section 321 de minimis duty-free threshold for HS 4409.10?
Under Section 321 (19 U.S.C. 1321), eligible shipments valued at $800 USD or less imported by one person on one day enter duty-free and tax-free.
What U.S. Customs bond requirements apply to commercial entries under HS 4409.10?
Formal entries with customs value exceeding $2,500 USD require a continuous customs entry bond (CBP Form 301) to guarantee payment of duties, taxes, and fees.
What Importer Security Filing (ISF 10+2) rules apply to ocean imports of HS 4409.10?
Ocean container shipments bound for US ports require electronic ISF 10+2 submission via ACE at least 24 hours before loading at foreign ports.
How do USMCA preference rules apply to commercial imports under HS 4409.10?
Qualifying originating goods from Canada or Mexico meeting USMCA tariff-shift or Regional Value Content (RVC) rules enter duty-free under SPI code 'P'.
💬
Ask Jack — Customs Lookup