HS Code 7306.21 : Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for casing and tubing of a kind used in drilling for oil or gas, welded of stainless steel is 7306.21. Under the 2026 United States (USITC HTS), the representative MFN general duty rate is Free [USITC HTS 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 73
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
Heading 7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
Subheading .21
.21
Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United States (USITC HTS 2026)
7306.21
MODULE 5: US IMPORT DUTY & FEE BREAKDOWN (LANDED COST STACK)
Federal Import VAT / GST
0.00%
US Has NO Federal VAT
Notice: Duty rates and trade remedies change frequently (Section 301, Section 232, anti-dumping orders, de minimis thresholds). Duty calculations are estimates for informational purposes only. Always verify exact rates with U.S. Customs and Border Protection (CBP) or a licensed customs broker prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7306.21
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 7306.21.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
0% Additional Duty (Exempt)
Section 232 Steel/Aluminum Status
25% Additional Duty (Proclamation 9704)
EU CBAM Carbon Alert
EU CBAM Covered Sector
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel
MODULE 11: Official CBP CROSS Binding Classification Rulings
No ruling cached for HS 7306.21.
Query the live U.S. Customs and Border Protection e-Rulings database:
Search Live CBP CROSS Database for 7306.21 →US National HTS Tariff Lines (7306.21)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 7306.21 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel | Free | Free | Rate on request | — |
| 7306.21.30.00 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Casing, Threaded or coupled | Free | Free | 28% | kg |
| 7306.21.40.00 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Casing, Other | Free | Free | 8.5% | kg |
| 7306.21.80 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Tubing | Free | Free | 10% | — |
| 7306.21.80.10 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Tubing, Imported with coupling | Free | Free | Rate on request | kg |
| 7306.21.80.50 | Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Tubing, Other | Free | Free | Rate on request | kg |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 7306.11 | Subheading under Heading 7306 | Compare Subheading 7306.11 → |
| 7306.19 | Subheading under Heading 7306 | Compare Subheading 7306.19 → |
| 7306.29 | Subheading under Heading 7306 | Compare Subheading 7306.29 → |
| 7306.30 | Subheading under Heading 7306 | Compare Subheading 7306.30 → |
| 7306.40 | Subheading under Heading 7306 | Compare Subheading 7306.40 → |
| 7306.50 | Subheading under Heading 7306 | Compare Subheading 7306.50 → |
| 7306.61 | Subheading under Heading 7306 | Compare Subheading 7306.61 → |
| 7306.69 | Subheading under Heading 7306 | Compare Subheading 7306.69 → |
MODULE 13: Industry Classification & Crosswalk Mesh (NAICS & Schedule B)
U.S. Census NAICS Code
U.S. Census Schedule B (Exports)
Official Primary Sources & Authority References
USITC HTS Chapter 73 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel.
CBP CROSS Ruling Database (7306.21) ↗
Binding customs classification precedents for Heading 7306.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel?
Under WCO Harmonized System 2022 and United States (USITC HTS), Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel is classified under HS 7306.21 (Heading 7306, Chapter 73). The representative US MFN general duty rate is Free.
How is HS 7306.21 distinguished within Heading 7306 (Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel)?
Heading 7306 covers Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel. Subheading 7306.21 specifically isolates Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7306.
What are the primary candidate subheadings related to HS 7306.21?
Related subheadings under Heading 7306 include 7306.11, 7306.19, 7306.29, 7306.30, 7306.40, 7306.50, 7306.61, 7306.69. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 7306.21 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel?
Commercial shipments of Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 7306.21?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
Are Section 232 tariffs applicable to steel/aluminum imports under HS 7306.21?
Yes. Products in Chapter 73 are subject to Presidential Section 232 trade remedies (Proclamation 9704). Steel articles generally incur an additional 25% ad valorem duty unless covered by an official Commerce Department exclusion or tariff-rate quota (TRQ).
What U.S. Census NAICS industry code corresponds to HS 7306.21?
HS 7306.21 maps to NAICS code 331210 (Steel Product Manufacturing from Purchased Steel) under official U.S. Census Bureau trade concordance tables.
Does the United States assess federal VAT or GST on imports of HS 7306.21?
No. The United States does NOT charge a federal Value-Added Tax (VAT) or Goods and Services Tax (GST) on imports. Importers pay customs duty + MPF + HMF (if ocean freight).
How are Merchandise Processing Fee (MPF) and Harbor Maintenance Fee (HMF) calculated?
MPF is assessed at 0.3464% of entered value (min $32.71, max $634.62 per entry). HMF is assessed at 0.125% on ocean freight shipments entering US ports.
What is the Section 321 de minimis duty-free threshold for HS 7306.21?
Under Section 321 (19 U.S.C. 1321), eligible shipments valued at $800 USD or less imported by one person on one day enter duty-free and tax-free.
What U.S. Customs bond requirements apply to commercial entries under HS 7306.21?
Formal entries with customs value exceeding $2,500 USD require a continuous customs entry bond (CBP Form 301) to guarantee payment of duties, taxes, and fees.
What Importer Security Filing (ISF 10+2) rules apply to ocean imports of HS 7306.21?
Ocean container shipments bound for US ports require electronic ISF 10+2 submission via ACE at least 24 hours before loading at foreign ports.
How do USMCA preference rules apply to commercial imports under HS 7306.21?
Qualifying originating goods from Canada or Mexico meeting USMCA tariff-shift or Regional Value Content (RVC) rules enter duty-free under SPI code 'P'.