Home › Chapter 84 › Heading 8446 › 8446.30

HS Code 8446.30 : For weaving fabrics of a width exceeding 30 cm, shuttleless type

The 6-digit Harmonized System (HS) code for for weaving fabrics of a width exceeding 30 cm, shuttleless type is 8446.30. Under the 2026 United States (USITC HTS), the representative MFN general duty rate is 3.7% [USITC HTS Tariff Schedule 2026].

Chapter

Ch 84

Heading

8446

Subheading

8446.30

US MFN Duty

3.7%

MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY

Chapter 84

Weaving machines (looms)

Heading 8446

8446

Weaving machines (looms)

Subheading .30

.30

For weaving fabrics of a width exceeding 30 cm, shuttleless type

MODULE 4: SIGNATURE B: TARIFF MATRIX

Import Duty Rates by Destination

United States (USITC HTS 2026)

8446.30

Representative General Duty

3.7%

(rates range Free–3.7% across national sub-lines)

Verified July 2026 · USITC Source

MODULE 5: US IMPORT DUTY & FEE BREAKDOWN (LANDED COST STACK)

Base Customs Duty

3.7%

MFN Rate [USITC]

Merchandise Processing Fee (MPF)

0.3464%

Min $32.71 / Max $634.62 [19 CFR 24.23]

Harbor Maintenance Fee (HMF)

0.125%

Ocean Cargo [19 CFR 24.24]

Federal Import VAT / GST

0.00%

US Has NO Federal VAT

Notice: Duty rates and trade remedies change frequently (Section 301, Section 232, anti-dumping orders, de minimis thresholds). Duty calculations are estimates for informational purposes only. Always verify exact rates with U.S. Customs and Border Protection (CBP) or a licensed customs broker prior to import.

TRACK THIS HS CODE

Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8446.30

Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 8446.30.

MODULE 6: Mandatory Customs Entry Document Matrix

Rule-Derived Customs Entry Package Checklist

UNIVERSAL DOCUMENT

Commercial Invoice

Itemized description, currency, Incoterms, seller/buyer details, and country of origin.

UNIVERSAL DOCUMENT

Packing List & Bill of Lading

Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.

PREFERENTIAL RULE

Certificate of Origin (If Claiming FTA)

Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.

MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags

Standard Entry This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.

MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)

China Section 301 Tariff Status

7.5% – 25% Additional Duty (China Origin)

Section 232 Steel/Aluminum Status

Exempt (Non-Metal Commodity)

EU CBAM Carbon Alert

Not in Scope

MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)

Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.

Agreement Code	Trade Agreement / Program	Preferential Rate	Rules of Origin (RoO) Requirement
P	United States-Mexico-Canada Agreement (USMCA)	Free	Must meet USMCA Regional Value Content (RVC) or tariff shift rules.
KR	U.S.-Korea Free Trade Agreement (KORUS)	Free	Direct shipment from South Korea with KORUS Certificate of Origin.
AU	U.S.-Australia Free Trade Agreement	Free	Wholly obtained or tariff shift rule under US-Australia FTA.
A / D	GSP / African Growth & Opportunity Act (AGOA)	Free	35% local value-add requirement for beneficiary country origin.

MODULE 10: Logistics, Freight & Transport Specifications

Standard 20ft Container

~28 CBM / 28,000 kg Payload

Standard 40ft High-Cube

~68 CBM / 28,600 kg Payload

Stowage Factor & Handling

Standard commercial packaging for For weaving fabrics of a width exceeding 30 cm, shuttleless type

MODULE 11: Official CBP CROSS Binding Classification Rulings

No official CBP CROSS classification precedents indexed for subheading 844630 yet.

US National HTS Tariff Lines (8446.30)

HTS Code	Description	General Rate	Special (FTA) Rate	Column 2 Rate	Unit
8446.30	For weaving fabrics of a width exceeding 30 cm, shuttleless type	Free	Free	Rate on request	—
8446.30.10	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Power looms for weaving fabrics of a width exceeding 4.9 m	Free	Free	40%	—
8446.30.10.10	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Power looms for weaving fabrics of a width exceeding 4.9 m, Rapier type	Free	Free	Rate on request	No.
8446.30.10.20	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Power looms for weaving fabrics of a width exceeding 4.9 m, Jet type	Free	Free	Rate on request	No.
8446.30.10.30	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Power looms for weaving fabrics of a width exceeding 4.9 m, Other	Free	Free	Rate on request	No.
8446.30.50	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Other	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%	—
8446.30.50.10	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Other, Rapier type	Free	Free	Rate on request	No.
8446.30.50.20	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Other, Jet type	Free	Free	Rate on request	No.
8446.30.50.30	For weaving fabrics of a width exceeding 30 cm, shuttleless type, Other, Other	Free	Free	Rate on request	No.

💡 U.S. Free Trade Agreement (FTA) Duty-Saver

HTS General Note 3(c) Eligible

Merchandise under HS 8446.30 may qualify for reduced or duty-free preferential rates under U.S. Free Trade Agreements (USMCA, KORUS, Australia FTA, Israel FTA, Chile FTA, etc.) when meeting statutory Rules of Origin:

10-Digit HTS	MFN Rate (General)	Preferential / FTA Rate (Special Program)
8446.30.50.10	3.7%	A: Generalized System of Preferences (GSP) AU: United States-Australia Free Trade Agreement BH: United States-Bahrain Free Trade Agreement CL: United States-Chile Free Trade Agreement CO: United States-Colombia Trade Promotion Agreement E: Caribbean Basin Economic Recovery Act (CBERA) IL: United States-Israel Free Trade Agreement JO: United States-Jordan Free Trade Agreement KR: U.S.-Korea Free Trade Agreement (KORUS) MA: United States-Morocco Free Trade Agreement OM: United States-Oman Free Trade Agreement P: United States-Mexico-Canada Agreement (USMCA / CUSMA / T-MEC) PA: United States-Panama Trade Promotion Agreement PE: United States-Peru Trade Promotion Agreement S: United States-Mexico-Canada Agreement (USMCA) SG: United States-Singapore Free Trade Agreement
8446.30.50.20	3.7%	A: Generalized System of Preferences (GSP) AU: United States-Australia Free Trade Agreement BH: United States-Bahrain Free Trade Agreement CL: United States-Chile Free Trade Agreement CO: United States-Colombia Trade Promotion Agreement E: Caribbean Basin Economic Recovery Act (CBERA) IL: United States-Israel Free Trade Agreement JO: United States-Jordan Free Trade Agreement KR: U.S.-Korea Free Trade Agreement (KORUS) MA: United States-Morocco Free Trade Agreement OM: United States-Oman Free Trade Agreement P: United States-Mexico-Canada Agreement (USMCA / CUSMA / T-MEC) PA: United States-Panama Trade Promotion Agreement PE: United States-Peru Trade Promotion Agreement S: United States-Mexico-Canada Agreement (USMCA) SG: United States-Singapore Free Trade Agreement
8446.30.50.30	3.7%	A: Generalized System of Preferences (GSP) AU: United States-Australia Free Trade Agreement BH: United States-Bahrain Free Trade Agreement CL: United States-Chile Free Trade Agreement CO: United States-Colombia Trade Promotion Agreement E: Caribbean Basin Economic Recovery Act (CBERA) IL: United States-Israel Free Trade Agreement JO: United States-Jordan Free Trade Agreement KR: U.S.-Korea Free Trade Agreement (KORUS) MA: United States-Morocco Free Trade Agreement OM: United States-Oman Free Trade Agreement P: United States-Mexico-Canada Agreement (USMCA / CUSMA / T-MEC) PA: United States-Panama Trade Promotion Agreement PE: United States-Peru Trade Promotion Agreement S: United States-Mexico-Canada Agreement (USMCA) SG: United States-Singapore Free Trade Agreement

⚠️ GSP Statutory Caveat: Tariff preference codes A, A+, A* refer to the U.S. Generalized System of Preferences. GSP duty-free entry applies when GSP statutory authorization is currently in effect by U.S. Congress.

📜 Certificate of Origin Requirement: Preferential tariff treatment requires a valid Certificate of Origin demonstrating compliance with product-specific Rules of Origin (tariff shift or Regional Value Content). Eligibility is not automatic — verify origin rules at HTS General Note 3(c) Authority.

Informational lookup only — not legal, customs, or compliance advice. Verify official FTA eligibility with U.S. Customs and Border Protection (CBP) and a licensed customs broker before claiming preference on entry.

US 10-Digit Statistical HTS Breakout (8446.30)

6 Declarable Lines · USITC 2026

10-Digit HTS Code	Statistical Description	General MFN Rate	FTA / Special Rate	Unit
8446.30.10.10	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Power looms for weaving fabrics of a width exceeding 4.9 m Rapier type	Free	Base MFN	No.
8446.30.10.20	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Power looms for weaving fabrics of a width exceeding 4.9 m Jet type	Free	Base MFN	No.
8446.30.10.30	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Power looms for weaving fabrics of a width exceeding 4.9 m Other	Free	Base MFN	No.
8446.30.50.10	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Other Rapier type	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	No.
8446.30.50.20	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Other Jet type	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	No.
8446.30.50.30	Weaving machines (looms): For weaving fabrics of a width exceeding 30 cm, shuttleless type: Other Other	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	No.

MODULE 12: Candidate Subheadings & Related Codes

Related HS Code	Heading Category	Action
8446.10	Subheading under Heading 8446	HS 8446.10 undefined Duty & Entry Rules →
8446.21	Subheading under Heading 8446	HS 8446.21 undefined Duty & Entry Rules →
8446.29	Subheading under Heading 8446	HS 8446.29 undefined Duty & Entry Rules →

MODULE 13: Industry Classification & Crosswalk Mesh (NAICS & Schedule B)

U.S. Census NAICS Code

333248 : Industrial Machinery Manufacturing

U.S. Census Schedule B (Exports)

8446.30.0000 : WEAVING MACH F FABRICS OV 30 CM WIDE, SHUTTLELESS

Official Primary Sources & Authority References

USITC HTS Chapter 84 Tariff Schedule (2026) ↗

Official U.S. 10-digit tariff lines and general duty rates for For weaving fabrics of a width exceeding 30 cm, shuttleless type.

CBP CROSS Ruling Database (8446.30) ↗

Binding customs classification precedents for Heading 8446.

MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide

What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for For weaving fabrics of a width exceeding 30 cm, shuttleless type?

Under WCO Harmonized System 2022 and United States (USITC HTS), For weaving fabrics of a width exceeding 30 cm, shuttleless type is classified under HS 8446.30 (Heading 8446, Chapter 84). The representative US MFN general duty rate is 3.7%.

How is HS 8446.30 distinguished within Heading 8446 (Weaving machines (looms))?

Heading 8446 covers Weaving machines (looms). Subheading 8446.30 specifically isolates For weaving fabrics of a width exceeding 30 cm, shuttleless type. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8446.

What are the primary candidate subheadings related to HS 8446.30?

Related subheadings under Heading 8446 include 8446.10, 8446.21, 8446.29. Classification depends on processing stage, decaffeination, purity, or material form.

What mandatory commercial entry documents are required to import For weaving fabrics of a width exceeding 30 cm, shuttleless type?

Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.

Can goods under HS 8446.30 enter duty-free under USMCA or Free Trade Agreements?

Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.

What is the US formal entry threshold for shipments of For weaving fabrics of a width exceeding 30 cm, shuttleless type?

Commercial shipments of For weaving fabrics of a width exceeding 30 cm, shuttleless type with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.

How can an importer obtain a binding CBP classification ruling for HS 8446.30?

Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.

What U.S. Census NAICS industry code corresponds to HS 8446.30?

HS 8446.30 maps to NAICS code 333248 (Industrial Machinery Manufacturing) under official U.S. Census Bureau trade concordance tables.

Does the United States assess federal VAT or GST on imports of HS 8446.30?

No. The United States does NOT charge a federal Value-Added Tax (VAT) or Goods and Services Tax (GST) on imports. Importers pay customs duty + MPF + HMF (if ocean freight).

How are Merchandise Processing Fee (MPF) and Harbor Maintenance Fee (HMF) calculated?

MPF is assessed at 0.3464% of entered value (min $32.71, max $634.62 per entry). HMF is assessed at 0.125% on ocean freight shipments entering US ports.

What is the Section 321 de minimis duty-free threshold for HS 8446.30?

Under Section 321 (19 U.S.C. 1321), eligible shipments valued at $800 USD or less imported by one person on one day enter duty-free and tax-free.

What U.S. Customs bond requirements apply to commercial entries under HS 8446.30?

Formal entries with customs value exceeding $2,500 USD require a continuous customs entry bond (CBP Form 301) to guarantee payment of duties, taxes, and fees.

What Importer Security Filing (ISF 10+2) rules apply to ocean imports of HS 8446.30?

Ocean container shipments bound for US ports require electronic ISF 10+2 submission via ACE at least 24 hours before loading at foreign ports.

How do USMCA preference rules apply to commercial imports under HS 8446.30?

Qualifying originating goods from Canada or Mexico meeting USMCA tariff-shift or Regional Value Content (RVC) rules enter duty-free under SPI code 'P'.

💬 Ask Jack — Customs Lookup