HS Code 8467.29 : With self-contained electric motor, Other
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
Tariff data verified: July 2026
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for with self-contained electric motor, other is 8467.29. Under the 2026 United States (USITC HTS), the representative MFN general duty rate is Free [USITC HTS Tariff Schedule 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 84
Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof
Heading 8467
Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof
Subheading .29
.29
With self-contained electric motor, Other
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
United StatesUnited KingdomEuropean UnionCanadaMexicoChinaJapanIndiaAustraliaSouth KoreaGermanyNetherlandsBrazilTürkiyeChinese TaipeiVietnamThailandIndonesiaMalaysiaSingaporeSaudi ArabiaUnited Arab EmiratesSouth AfricaEgyptIsraelChileColombiaPeruPhilippinesPakistanNew ZealandNorwayNigeriaKenyaMoroccoArgentinaEcuadorBangladeshUkraineKazakhstanQatarKuwaitOmanJordanBahrainSri LankaTunisiaGhanaCôte d'IvoireGeorgiaCambodiaPanamaCosta RicaDominican Republic
United States (USITC HTS 2026)
8467.29.00
MODULE 5: US IMPORT DUTY & FEE BREAKDOWN (LANDED COST STACK)
Federal Import VAT / GST
0.00%
US Has NO Federal VAT
Notice: Duty rates and trade remedies change frequently (Section 301, Section 232, anti-dumping orders, de minimis thresholds). Duty calculations are estimates for informational purposes only. Always verify exact rates with U.S. Customs and Border Protection (CBP) or a licensed customs broker prior to import.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 8467.29
Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 8467.29.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Trade Remedies (Section 301, Section 232, AD/CVD)
China Section 301 Tariff Status
7.5% – 25% Additional Duty (China Origin)
Section 232 Steel/Aluminum Status
Exempt (Non-Metal Commodity)
EU CBAM Carbon Alert
Not in Scope
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| P | United States-Mexico-Canada Agreement (USMCA) | Free | Must meet USMCA Regional Value Content (RVC) or tariff shift rules. |
| KR | U.S.-Korea Free Trade Agreement (KORUS) | Free | Direct shipment from South Korea with KORUS Certificate of Origin. |
| AU | U.S.-Australia Free Trade Agreement | Free | Wholly obtained or tariff shift rule under US-Australia FTA. |
| A / D | GSP / African Growth & Opportunity Act (AGOA) | Free | 35% local value-add requirement for beneficiary country origin. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for With self-contained electric motor, Other
MODULE 11: Official CBP CROSS Binding Classification Rulings
No official CBP CROSS classification precedents indexed for subheading 846729 yet.
US National HTS Tariff Lines (8467.29)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 8467.29.00 | With self-contained electric motor, Other | Free | Free | 35% | — |
| 8467.29.00.10 | With self-contained electric motor, Other, Grinders, polishers and sanders, Angle grinders, sanders and polishers | Free | Free | Rate on request | No. |
| 8467.29.00.15 | With self-contained electric motor, Other, Grinders, polishers and sanders, Orbital and straight-line sanders | Free | Free | Rate on request | No. |
| 8467.29.00.25 | With self-contained electric motor, Other, Grinders, polishers and sanders, Other, Belt sanders | Free | Free | Rate on request | No. |
| 8467.29.00.35 | With self-contained electric motor, Other, Grinders, polishers and sanders, Other, Other | Free | Free | Rate on request | No. |
| 8467.29.00.40 | With self-contained electric motor, Other, Screwdrivers, nut-runners and impact wrenches | Free | Free | Rate on request | No. |
| 8467.29.00.55 | With self-contained electric motor, Other, Routers | Free | Free | Rate on request | No. |
| 8467.29.00.65 | With self-contained electric motor, Other, Planers | Free | Free | Rate on request | No. |
| 8467.29.00.70 | With self-contained electric motor, Other, Grass and weed trimmers/edgers | Free | Free | Rate on request | No. |
| 8467.29.00.80 | With self-contained electric motor, Other, Electropneumatic rotary and percussion hammers | Free | Free | Rate on request | No. |
| 8467.29.00.85 | With self-contained electric motor, Other, Electric scissors | Free | Free | Rate on request | No. |
| 8467.29.00.90 | With self-contained electric motor, Other, Other | Free | Free | Rate on request | No. |
US 10-Digit Statistical HTS Breakout (8467.29)
12 Declarable Lines · USITC 2026
⚠️ Section 301 (China) Additional Tariff Alert
Heading 9903.88.15
If imported from China, merchandise under this HTS line carries an additional Section 301 tariff (see HTS heading 9903.88.15). Applicable Section 301 rates depend on country of origin — verify exact rate and exemptions at hts.usitc.gov.
| 10-Digit HTS Code | Statistical Description | General MFN Rate | FTA / Special Rate | Unit |
|---|---|---|---|---|
| 8467.29.00 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other | Free | Base MFN | — |
| 8467.29.00.10 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Grinders, polishers and sanders: Angle grinders, sanders and polishers | Free | Base MFN | No. |
| 8467.29.00.15 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Grinders, polishers and sanders: Orbital and straight-line sanders | Free | Base MFN | No. |
| 8467.29.00.25 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Grinders, polishers and sanders: Other: Belt sanders | Free | Base MFN | No. |
| 8467.29.00.35 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Grinders, polishers and sanders: Other: Other | Free | Base MFN | No. |
| 8467.29.00.40 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Screwdrivers, nut-runners and impact wrenches | Free | Base MFN | No. |
| 8467.29.00.55 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Routers | Free | Base MFN | No. |
| 8467.29.00.65 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Planers | Free | Base MFN | No. |
| 8467.29.00.70 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Grass and weed trimmers/edgers | Free | Base MFN | No. |
| 8467.29.00.80 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Electropneumatic rotary and percussion hammers | Free | Base MFN | No. |
| 8467.29.00.85 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Electric scissors | Free | Base MFN | No. |
| 8467.29.00.90 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: With self-contained electric motor: Other Other | Free | Base MFN | No. |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 8467.11 | Subheading under Heading 8467 | HS 8467.11 undefined Duty & Entry Rules → |
| 8467.19 | Subheading under Heading 8467 | HS 8467.19 undefined Duty & Entry Rules → |
| 8467.21 | Subheading under Heading 8467 | HS 8467.21 undefined Duty & Entry Rules → |
| 8467.22 | Subheading under Heading 8467 | HS 8467.22 undefined Duty & Entry Rules → |
MODULE 13: Industry Classification & Crosswalk Mesh (NAICS & Schedule B)
U.S. Census NAICS Code
U.S. Census Schedule B (Exports)
Official Primary Sources & Authority References
USITC HTS Chapter 84 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for With self-contained electric motor, Other.
CBP CROSS Ruling Database (8467.29) ↗
Binding customs classification precedents for Heading 8467.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for With self-contained electric motor, Other?
Under WCO Harmonized System 2022 and United States (USITC HTS), With self-contained electric motor, Other is classified under HS 8467.29 (Heading 8467, Chapter 84). The representative US MFN general duty rate is Free.
How is HS 8467.29 distinguished within Heading 8467 (Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof)?
Heading 8467 covers Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof. Subheading 8467.29 specifically isolates With self-contained electric motor, Other. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 8467.
What are the primary candidate subheadings related to HS 8467.29?
Related subheadings under Heading 8467 include 8467.11, 8467.19, 8467.21, 8467.22, 8467.81, 8467.89, 8467.91, 8467.92. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import With self-contained electric motor, Other?
Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.
Can goods under HS 8467.29 enter duty-free under USMCA or Free Trade Agreements?
Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.
What is the US formal entry threshold for shipments of With self-contained electric motor, Other?
Commercial shipments of With self-contained electric motor, Other with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.
How can an importer obtain a binding CBP classification ruling for HS 8467.29?
Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.
What U.S. Census NAICS industry code corresponds to HS 8467.29?
HS 8467.29 maps to NAICS code 333991 (Other General Purpose Machinery Manufacturing) under official U.S. Census Bureau trade concordance tables.
Does the United States assess federal VAT or GST on imports of HS 8467.29?
No. The United States does NOT charge a federal Value-Added Tax (VAT) or Goods and Services Tax (GST) on imports. Importers pay customs duty + MPF + HMF (if ocean freight).
How are Merchandise Processing Fee (MPF) and Harbor Maintenance Fee (HMF) calculated?
MPF is assessed at 0.3464% of entered value (min $32.71, max $634.62 per entry). HMF is assessed at 0.125% on ocean freight shipments entering US ports.
What is the Section 321 de minimis duty-free threshold for HS 8467.29?
Under Section 321 (19 U.S.C. 1321), eligible shipments valued at $800 USD or less imported by one person on one day enter duty-free and tax-free.
What U.S. Customs bond requirements apply to commercial entries under HS 8467.29?
Formal entries with customs value exceeding $2,500 USD require a continuous customs entry bond (CBP Form 301) to guarantee payment of duties, taxes, and fees.
What Importer Security Filing (ISF 10+2) rules apply to ocean imports of HS 8467.29?
Ocean container shipments bound for US ports require electronic ISF 10+2 submission via ACE at least 24 hours before loading at foreign ports.
How do USMCA preference rules apply to commercial imports under HS 8467.29?
Qualifying originating goods from Canada or Mexico meeting USMCA tariff-shift or Regional Value Content (RVC) rules enter duty-free under SPI code 'P'.
💬
Ask Jack — Customs Lookup