HS Code 4412.39 : Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, other, with both outer plies of coniferous wood is 4412.39. Under the 2026 Mexico (SAT / TIGIE), the representative MFN general duty rate is 5.00 % [SNICE TIGIE 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Subheading .39
.39
Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
Mexico (SAT / TIGIE Customs Tariff 2026)
4412.39.01.00
MODULE 5: MEXICAN IMPORT DUTY & TAX BREAKDOWN (LANDED COST STACK)
🇲🇽 T-MEC / USMCA DUTY-FREE PREFERENCE ELIGIBILITY
Qualifying originating goods from the United States or Canada satisfying T-MEC tariff shift or Regional Value Content (RVC) rules enter Mexico duty-free with an official T-MEC Certificate of Origin.
Official SAT Rulings: Request a Servicio de Administración Tributaria [SAT Consulta Arancelaria ↗]
Notice: Mexican customs entry, TIGIE tariffs, DTA fees, and IVA taxes are governed by the Servicio de Administración Tributaria (SAT). Always verify exact 10-digit Fracción and NICO items with an accredited Agente Aduanal.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 4412.39
Receive an automated email notification whenever SAT or Secretaría de Economía publishes duty rate adjustments or customs notices for 4412.39.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Mexican Trade Remedies (SE / UPCI) & Safeguards
SE UPCI Anti-Dumping Status
Standard TIGIE Tariff
DOF Steel Safeguard Decrees
Exempt (Non-Steel Commodity)
SAGARPA / COFEPRIS / NOM Status
Standard Statutory Clearance
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| TMEC | Tratado entre México, Estados Unidos y Canadá (T-MEC / USMCA) | Free | Must satisfy T-MEC tariff shift or Regional Value Content (RVC) rules. |
| CPTPP | Tratado de Integración Progresista de la Asociación Transpacífico | Free / Preferential | CPTPP Certificate of Origin and origin criterion. |
| TLCUEM | Acuerdo Global México-Unión Europea (TLCUEM) | Free / Preferential | EUR.1 Movement Certificate or REX Exporter Declaration. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood
MODULE 11: SAT Consulta Arancelaria (Diario Oficial de la Federación)
Legally binding tariff classification rulings issued by Servicio de Administración Tributaria (SAT) for HS 4412.39.
Query official SAT Central Administration of Customs Normativity consulta criteria:
Search Official SAT Consulta Portal for 4412.39 →US National HTS Tariff Lines (4412.39)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 4412.39 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood | Free | Free | Rate on request | — |
| 4412.39.10.00 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, With a face ply of Parana pine (Araucaria angustifolia) | Free | Free | 40% | m3 |
| 4412.39.30.00 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, With a face ply of European red pine (Pinus silvestris) | 3.4% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 40% | m3 |
| 4412.39.40 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other | 8% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 40% | — |
| 4412.39.40.11 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Douglas fir (Pseudotsuga menziesii), Rough, or touch sanded for sizing purposes, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.12 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Douglas fir (Pseudotsuga menziesii), Fully sanded on at least one face, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.19 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Douglas fir (Pseudotsuga menziesii), Other | Free | Free | Rate on request | m3 |
| 4412.39.40.31 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana), Rough, or touch sanded for sizing purposes, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.32 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana), Fully sanded on at least one face, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.39 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana), Other | Free | Free | Rate on request | m3 |
| 4412.39.40.51 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Agathis spp., Rough, or touch sanded for sizing purposes, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.52 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Agathis spp., Fully sanded on at least one face, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.59 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, With at least one outer ply of Agathis spp., Other | Free | Free | Rate on request | m3 |
| 4412.39.40.61 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, Other, Rough, or touch sanded for sizing purposes, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.62 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, Other, Fully sanded on at least one face, but not further processed | Free | Free | Rate on request | m3 |
| 4412.39.40.69 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, Other, Other, Other | Free | Free | Rate on request | m3 |
| 4412.39.50 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Other | 5.1% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 40% | — |
| 4412.39.50.10 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Other, With at least one outer ply of Douglas fir (Pseudotsuga menziesii) | Free | Free | Rate on request | m3 |
| 4412.39.50.30 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Other, With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana) | Free | Free | Rate on request | m3 |
| 4412.39.50.50 | Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood, Other, Other | Free | Free | Rate on request | m3 |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 4412.10 | Subheading under Heading 4412 | Compare Subheading 4412.10 → |
| 4412.31 | Subheading under Heading 4412 | Compare Subheading 4412.31 → |
| 4412.33 | Subheading under Heading 4412 | Compare Subheading 4412.33 → |
| 4412.34 | Subheading under Heading 4412 | Compare Subheading 4412.34 → |
| 4412.41 | Subheading under Heading 4412 | Compare Subheading 4412.41 → |
| 4412.42 | Subheading under Heading 4412 | Compare Subheading 4412.42 → |
| 4412.49 | Subheading under Heading 4412 | Compare Subheading 4412.49 → |
| 4412.51 | Subheading under Heading 4412 | Compare Subheading 4412.51 → |
Official Primary Sources & Authority References
SNICE Portal de Consulta TIGIE 2026 ↗
Official Mexican 10-digit Fracción Arancelaria + NICO and MFN arancel rates.
Servicio de Administración Tributaria (SAT) Comercio Exterior ↗
Mexican customs administration, RFC Padrón, and IVA/DTA tax rules.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and Mexico (SAT / TIGIE) general duty for Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood?
Under WCO Harmonized System 2022 and Mexico (SAT / TIGIE), Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood is classified under HS 4412.39 (Heading 4412, Chapter 44). The representative MX MFN general duty rate is 5.00 %.
How is HS 4412.39 distinguished within Heading 4412 (Plywood, veneered panels and similar laminated wood)?
Heading 4412 covers Plywood, veneered panels and similar laminated wood. Subheading 4412.39 specifically isolates Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 4412.
What are the primary candidate subheadings related to HS 4412.39?
Related subheadings under Heading 4412 include 4412.10, 4412.31, 4412.33, 4412.34, 4412.41, 4412.42, 4412.49, 4412.51. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood into Mexico?
Importers require a Pedimento de Importación lodged via VUCEM by an accredited Agente Aduanal, COVE, commercial invoice, packing list, and bill of lading.
Can goods under HS 4412.39 enter duty-free under T-MEC / USMCA into Mexico?
Yes. Eligible goods originating in the United States or Canada satisfying T-MEC tariff-shift or Regional Value Content (RVC) rules enter Mexico duty-free with an official T-MEC Certificate of Origin.
What T-MEC express courier de minimis thresholds apply to Mexico for Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness, Other, with both outer plies of coniferous wood?
Under T-MEC express courier rules, goods imported into Mexico valued up to US$50 enter tax-free (IVA-free) and duty-free, while goods valued between US$50.01 and US$117 enter duty-free but remain subject to 16% IVA.
How can an importer obtain a SAT Consulta Arancelaria for HS 4412.39?
Importers may apply to SAT's Administración Central de Normatividad en Comercio Exterior under Article 47 of the Ley Aduanera for an official tariff classification ruling.
What import taxes (IVA and DTA) apply to commercial imports under HS 4412.39 into Mexico?
Commercial imports into Mexico incur 16.00% federal Value-Added Tax (IVA General) or 8.00% in the northern border zone (región fronteriza). Definitive non-preferential imports pay 0.80% ad valorem DTA (Derecho de Trámite Aduanero), while T-MEC originating goods pay a reduced fixed cuota.
What are the RFC and Padrón de Importadores registration requirements for HS 4412.39?
Commercial importers in Mexico must hold an active RFC (Registro Federal de Contribuyentes) with SAT and be enrolled in the Padrón de Importadores (and Padrón de Sectores Específicos if importing regulated steel, apparel, or chemical tariff lines).
What entry documents are required for Mexican customs clearance under HS 4412.39?
Commercial entry requires a Pedimento de Importación lodged by an Agente Aduanal via VUCEM (Ventanilla Única de Comercio Exterior Mexicana), accompanied by a COVE (Comprobante de Valor Electrónico), commercial invoice, packing list, and bill of lading.
How do T-MEC / USMCA preferential rules of origin apply to HS 4412.39?
Qualifying originating goods from the United States or Canada meeting T-MEC tariff-shift or Regional Value Content (RVC) rules enter Mexico duty-free with an official T-MEC Certificate of Origin.
What T-MEC Low Value Shipment (LVS) courier de minimis thresholds apply to Mexico?
Under T-MEC express courier rules, goods imported into Mexico valued up to US$50 enter tax-free (IVA-free) and duty-free, while goods valued between US$50.01 and US$117 enter duty-free but remain subject to 16% IVA.
How are SAT Consulta Arancelaria binding classification rulings obtained in Mexico?
Importers may request an official ruling (consulta en materia de clasificación arancelaria) from SAT's Administración Central de Normatividad en Comercio Exterior under Article 47 of the Ley Aduanera.
What Mexican Normas Oficiales Mexicanas (NOMs) apply to HS 4412.39?
Imports under HS 4412.39 must comply with mandatory NOMs (such as NOM-004-SE-2021 for textiles, NOM-024-SCFI for electronics, or NOM-050-SCFI for general labeling) certified by an accredited Verification Unit (UVA).
Are there selective IEPS taxes or SE cuotas compensatorias for HS 4412.39?
Special Excise Tax (IEPS) applies selectively to alcohol, tobacco, fuels, and high-calorie foods. Importers must also verify if Secretaría de Economía (SE / UPCI) anti-dumping cuotas compensatorias apply based on country of origin.