HS Code 4407.19 : Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, coniferous, other is 4407.19. Under the 2026 Canada (CBSA), the representative MFN general duty rate is Free [CBSA Tariff 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Chapter 44
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
Heading 4407
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
Subheading .19
.19
Coniferous, Other
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
Canada (CBSA Customs Tariff 2026)
4407.19.00.00
MODULE 5: CANADIAN IMPORT DUTY & GST/HST BREAKDOWN
🇨🇦 CUSMA / USMCA DUTY-FREE PREFERENCE ELIGIBILITY
Goods originating in the United States or Mexico satisfying CUSMA Regional Value Content (RVC) or tariff shift rules enter Canada duty-free under the MUST (United States Tariff) preferential SPI.
Official CBSA Rulings: Request a Canada Border Services Agency [CBSA Advance Ruling ↗]
Notice: Canadian customs entry, duty assessment, and excise taxes are governed by the Canada Border Services Agency (CBSA). Always verify 10-digit tariff items with a licensed Canadian customs broker.
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 4407.19
Receive an automated email notification whenever the CBSA publishes duty rate adjustments or customs notices for 4407.19.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Canadian Trade Remedies (SIMA) & CITT Safeguards
CITT SIMA Anti-Dumping Status
Standard CBSA MFN Tariff
Canadian Steel Safeguards
Exempt (Non-Steel Commodity)
CFIA / Health Canada Control
Standard Statutory Clearance
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|---|---|---|
| MUST | Canada-United States-Mexico Agreement (CUSMA) | Free | Must meet CUSMA Regional Value Content (RVC) or tariff shift rules. |
| CEUT | Canada-European Union CETA Agreement | Free | CETA Origin Declaration issued by EU exporter. |
| CPTP | Trans-Pacific Partnership (CPTPP) | Free | CPTPP Certificate of Origin and value-add threshold. |
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other
MODULE 11: CBSA Advance Rulings for Tariff Classification
Legally binding tariff classification advance rulings issued by Canada Border Services Agency for HS 4407.19.
Query official CBSA Advance Rulings (Memorandum D11-11-1):
Search Official CBSA Advance Rulings for 4407.19 →CBSA Canadian 10-Digit Tariff Items (4407.19)
| HTS Code | Description | General Rate | Special (FTA) Rate | Column 2 Rate | Unit |
|---|---|---|---|---|---|
| 4407.19.00 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other | Free | Free | $1.70/m3 | — |
| 4407.19.00.01 | Coniferous, Other, Finger-jointed | Free | Free | Rate on request | m3 |
| 4407.19.00.02 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Treated with paint, stain, creosote or other preservative | Free | Free | Rate on request | m3 |
| 4407.19.00.54 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Douglas-fir (Pseudotsuga menziesii), Rough, Having a minimum dimension less than 5.1 cm | Free | Free | Rate on request | m3 |
| 4407.19.00.55 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Douglas-fir (Pseudotsuga menziesii), Rough, Having a minimum dimension 5.1 cm or more but less than 12.7 cm | Free | Free | Rate on request | m3 |
| 4407.19.00.56 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Douglas-fir (Pseudotsuga menziesii), Rough, Having a minimum dimension 12.7 cm or more | Free | Free | Rate on request | m3 |
| 4407.19.00.57 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Douglas-fir (Pseudotsuga menziesii), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.64 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Hemlock (Tsuga spp.), Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.65 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Hemlock (Tsuga spp.), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.66 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Larch (Larix spp.), Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.67 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Larch (Larix spp.), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.68 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Western red cedar, Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.69 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Western red cedar, Other | Free | Free | Rate on request | m3 |
| 4407.19.00.74 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Yellow cedar (Chamaecyparis nootkatensis), Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.75 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Yellow cedar (Chamaecyparis nootkatensis), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.76 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Other cedar (Thuja spp., Juniperus spp., Chamaecyparis spp., Cupressus spp. and Libocedrus spp.), Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.77 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Other cedar (Thuja spp., Juniperus spp., Chamaecyparis spp., Cupressus spp. and Libocedrus spp.), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.82 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Redwood (Sequoia sempervirens), Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.83 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Redwood (Sequoia sempervirens), Other | Free | Free | Rate on request | m3 |
| 4407.19.00.92 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Other, Rough | Free | Free | Rate on request | m3 |
| 4407.19.00.93 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other, Other, Not treated, Other, Other | Free | Free | Rate on request | m3 |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 4407.11 | Subheading under Heading 4407 | Compare Subheading 4407.11 → |
| 4407.12 | Subheading under Heading 4407 | Compare Subheading 4407.12 → |
| 4407.13 | Subheading under Heading 4407 | Compare Subheading 4407.13 → |
| 4407.14 | Subheading under Heading 4407 | Compare Subheading 4407.14 → |
| 4407.21 | Subheading under Heading 4407 | Compare Subheading 4407.21 → |
| 4407.22 | Subheading under Heading 4407 | Compare Subheading 4407.22 → |
| 4407.23 | Subheading under Heading 4407 | Compare Subheading 4407.23 → |
| 4407.25 | Subheading under Heading 4407 | Compare Subheading 4407.25 → |
Official Primary Sources & Authority References
CBSA Customs Tariff (Departmental Consolidation) ↗
Official Canadian 10-digit tariff items and MFN duty rates.
Canada Revenue Agency (CRA) Import GST/HST ↗
Federal GST and provincial HST tax administration.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and Canada (CBSA) general duty for Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other?
Under WCO Harmonized System 2022 and Canada (CBSA), Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other is classified under HS 4407.19 (Heading 4407, Chapter 44). The representative CA MFN general duty rate is Free.
How is HS 4407.19 distinguished within Heading 4407 (Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm)?
Heading 4407 covers Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Subheading 4407.19 specifically isolates Coniferous, Other. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 4407.
What are the primary candidate subheadings related to HS 4407.19?
Related subheadings under Heading 4407 include 4407.11, 4407.12, 4407.13, 4407.14, 4407.21, 4407.22, 4407.23, 4407.25. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other into Canada?
Importers require a CBSA B3 Canada Customs Coding Form, CARM Client Portal registration, Commercial Invoice, Packing List, Cargo Control Document (CCD), and CUSMA Certificate of Origin if claiming preferential tariffs.
Can goods under HS 4407.19 enter duty-free under CUSMA / USMCA into Canada?
Yes. Eligible goods originating in the United States or Mexico satisfying Regional Value Content (RVC) or tariff-shift rules enter Canada duty-free under the MUST preferential SPI.
What are the Canadian Low Value Shipment (LVS) de minimis thresholds for Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, Coniferous, Other?
Under CUSMA LTA rules, courier shipments from the US or Mexico valued up to C$150 enter Canada duty-free, and shipments up to C$40 enter tax-free.
How can an importer obtain a CBSA Advance Ruling for HS 4407.19?
Importers or foreign exporters may submit a written application to Canada Border Services Agency (CBSA) under Memorandum D11-11-1 to receive a legally binding Advance Ruling on tariff classification.
What sales tax (GST/HST) applies to imports of HS 4407.19 into Canada?
Imports into Canada incur 5.00% federal Goods and Services Tax (GST). Participating provinces assess Harmonized Sales Tax (HST): 13.00% in Ontario and 15.00% in Nova Scotia, New Brunswick, Newfoundland & Labrador, and Prince Edward Island.
What is the CARM Client Portal and Business Number (BN15) requirement for Canada?
Importers must register in the CBSA Assessment and Revenue Management (CARM) Client Portal and obtain a 15-digit CRA Import/Export Business Number (BN15) for commercial declarations.
How does Canadian GST/HST payment and deferral work for imports under HS 4407.19?
Import GST/HST is payable at the time of clearance unless the importer participates in the CBSA Option 2 GST Deferral Program via CARM.
What Canadian International Trade Tribunal (CITT) trade remedies apply to HS 4407.19?
Importers must verify whether Special Import Measures Act (SIMA) anti-dumping or countervailing duties determined by the CITT apply to their product origin.
What CFIA or Health Canada regulatory import permits are required for HS 4407.19?
Commercial imports under HS 4407.19 may require pre-market approval, licenses, or automated declarations via the CBSA Automated Import Reference System (AIRS).
Are there entry processing fees or harbor taxes in Canada?
No. Canada does not charge additional entry processing fees or harbor taxes beyond standard CBSA customs duties and applicable GST/HST sales taxes.